WldFb
Lower Midcard
Someone requested this at my forum. I found a way to move the mask and facial hair up and down on the face.
Using specific attire hacks you can increase and decrease a certain value to get the effect you want:
P1
D1077794 xxxx (Wrestler ID)
D10AA100 xxxx (facial hair value)
800AA11C 00xx (offset)
D1077794 xxxx (Wrestler ID)
D10AA0E0 xxxx (mask value)
800AA11D 00xx (offset)
P2
D1077796 xxxx (Wrestler ID)
D10AA370 xxxx (facial hair value)
800AA38C 00xx (offset)
D1077796 xxxx (Wrestler ID)
D10AA350 xxxx (mask value)
800AA38D 00xx (offset)
P3
D1077798 xxxx (Wrestler ID)
D10AA5E0 xxxx (facial hair value)
800AA5FC 00xx (offset)
D1077798 xxxx (Wrestler ID)
D10AA5C0 xxxx (mask value)
800AA5FD 00xx (offset)
P4
D107779A xxxx (Wrestler ID)
D10AA850 xxxx (facial hair value)
800AA86C 00xx (offset)
D107779A xxxx (Wrestler ID)
D10AA830 xxxx (mask value)
800AA86D 00xx (offset)
The offset is what you need to modify to move the facial hair and/or mask. Increase the values to move it down, decrease them to move it up.
For example if '00' is default:
FE = move up 2 units
FF = move up 1 unit
01 = move down 1 unit
02 = move down 2 units
and so on.
The default is not always 00 (sometimes it may be FF for example depending on the face, facial hair or mask used), but all you need to do is increase and decrease and see the result.
Example:
(When this caw uses bat mask and that facial hair the values are changed)
D1077794 0A12
D10AA100 1FAB
800AA11C 00F2
D1077794 0A12
D10AA0E0 2663
800AA11D 00F5
(When this caw uses mankind mask the value is changed)
D1077794 0A12
D10AA0E0 2653
800AA11D 00EA
This should open up more possibilites for attire hacking!
Using specific attire hacks you can increase and decrease a certain value to get the effect you want:
P1
D1077794 xxxx (Wrestler ID)
D10AA100 xxxx (facial hair value)
800AA11C 00xx (offset)
D1077794 xxxx (Wrestler ID)
D10AA0E0 xxxx (mask value)
800AA11D 00xx (offset)
P2
D1077796 xxxx (Wrestler ID)
D10AA370 xxxx (facial hair value)
800AA38C 00xx (offset)
D1077796 xxxx (Wrestler ID)
D10AA350 xxxx (mask value)
800AA38D 00xx (offset)
P3
D1077798 xxxx (Wrestler ID)
D10AA5E0 xxxx (facial hair value)
800AA5FC 00xx (offset)
D1077798 xxxx (Wrestler ID)
D10AA5C0 xxxx (mask value)
800AA5FD 00xx (offset)
P4
D107779A xxxx (Wrestler ID)
D10AA850 xxxx (facial hair value)
800AA86C 00xx (offset)
D107779A xxxx (Wrestler ID)
D10AA830 xxxx (mask value)
800AA86D 00xx (offset)
The offset is what you need to modify to move the facial hair and/or mask. Increase the values to move it down, decrease them to move it up.
For example if '00' is default:
FE = move up 2 units
FF = move up 1 unit
01 = move down 1 unit
02 = move down 2 units
and so on.
The default is not always 00 (sometimes it may be FF for example depending on the face, facial hair or mask used), but all you need to do is increase and decrease and see the result.
Example:
(When this caw uses bat mask and that facial hair the values are changed)
D1077794 0A12
D10AA100 1FAB
800AA11C 00F2
D1077794 0A12
D10AA0E0 2663
800AA11D 00F5
(When this caw uses mankind mask the value is changed)
D1077794 0A12
D10AA0E0 2653
800AA11D 00EA
This should open up more possibilites for attire hacking!