eatrawmeat391
Young Lion
- Joined
- Jan 2, 2015
- Messages
- 16
- Reaction score
- 0
Modifying CAF while in game (PAL)
This works for PAL only,for NTSC you can try decreasing the address by 2200 in hex to see if they works.Or perhap you could upload your save to a PAL friend and ask him to hack it for you?
Before we begin,there are things you should take notice:
1st Any moves can be assigned
2nd Assign any moves in "Create a Moveset" section and the Finisher will END after executing that move regardless of how many parts you have left(creating Dynamic Comeback will be harder
( )
3rd You MUST "follow the rule" for part 1 because the default move contain finisher position(Front Grapple,Diving,or Top Corner).That's why you can't just put a finisher in part 1
4th The character will glitched (like Atomic Leg Drop 2) if a move that must be done in ring get perform on the outside
5th Leave part 9 as a "CAF Finish" move so you can exit and save
6th The "attribute" show in Create A MoveSet belongs to the first "FINISH" move.For example:
Part 4: Clothesline 01 Finish
Part 6: Rock Bottom
Part 9: Codebreaker (bleeding)
It will be show as "Damage Head" (belongs to part 4)
7th Part 10 might freeze the game (70% esp with hacked CAF) so it is not included
8th Non-CAF move will show as "Press START button" but viewing them within Create A Moveset work
9th "9th move" should not be SITDOWN SHOCK IMPACT (see 4. Technical Information)
10th For now only "Front Grapple" is confirmed working,see 4. Technical Information to make other position working as well(there is no IDs for them YET however)
11th You can get the move ID from Cue here and CAF ID from CrocoX111 here.Thanks you for making this possible
12th Think about your moves carefully before proceed
1. Preparation
2. The Code
3. In-game
4. Technical Information
[/spoiler][/spoiler]
This works for PAL only,for NTSC you can try decreasing the address by 2200 in hex to see if they works.Or perhap you could upload your save to a PAL friend and ask him to hack it for you?
Before we begin,there are things you should take notice:
1st Any moves can be assigned
2nd Assign any moves in "Create a Moveset" section and the Finisher will END after executing that move regardless of how many parts you have left(creating Dynamic Comeback will be harder
( )3rd You MUST "follow the rule" for part 1 because the default move contain finisher position(Front Grapple,Diving,or Top Corner).That's why you can't just put a finisher in part 1
4th The character will glitched (like Atomic Leg Drop 2) if a move that must be done in ring get perform on the outside
5th Leave part 9 as a "CAF Finish" move so you can exit and save
6th The "attribute" show in Create A MoveSet belongs to the first "FINISH" move.For example:
Part 4: Clothesline 01 Finish
Part 6: Rock Bottom
Part 9: Codebreaker (bleeding)
It will be show as "Damage Head" (belongs to part 4)
7th Part 10 might freeze the game (70% esp with hacked CAF) so it is not included
8th Non-CAF move will show as "Press START button" but viewing them within Create A Moveset work
9th "9th move" should not be SITDOWN SHOCK IMPACT (see 4. Technical Information)
10th For now only "Front Grapple" is confirmed working,see 4. Technical Information to make other position working as well(there is no IDs for them YET however)
11th You can get the move ID from Cue here and CAF ID from CrocoX111 here.Thanks you for making this possible
12th Think about your moves carefully before proceed
1. Preparation
Copy your CAF slot 1(the first slot) to another position and delete it
+ PS2 Users should active the code with your prefered cheating device
+ PC Users should use Cheat Engine and add the following addressall values are Integer 2 bytes)
<blockquote class='quote\\_blockquote'><dl><dt>Quote:</dt><dd> </dd></dl><div>
Note: You have to actived all 9 parts in CAF slot 1 first
* Address: 20F68EDC - Description: CAF slot 1
* Address: 20F68EDE - Description: CAF slot 2
* Address: 20F68EE0 - Description: CAF slot 3
* Address: 20F68EE2 - Description: CAF slot 4
* Address: 20F68EE4 - Description: CAF slot 5
* Address: 20F68EE6 - Description: CAF slot 6
* Address: 20F68EE8 - Description: CAF slot 7
* Address: 20F68EEA - Description: CAF slot 8
* Address: 20F68EEC - Description: CAF slot 9
[/quote]
+ PS2 Users should active the code with your prefered cheating device
+ PC Users should use Cheat Engine and add the following address
all values are Integer 2 bytes)<blockquote class='quote\\_blockquote'><dl><dt>Quote:</dt><dd> </dd></dl><div>
Note: You have to actived all 9 parts in CAF slot 1 first
* Address: 20F68EDC - Description: CAF slot 1
* Address: 20F68EDE - Description: CAF slot 2
* Address: 20F68EE0 - Description: CAF slot 3
* Address: 20F68EE2 - Description: CAF slot 4
* Address: 20F68EE4 - Description: CAF slot 5
* Address: 20F68EE6 - Description: CAF slot 6
* Address: 20F68EE8 - Description: CAF slot 7
* Address: 20F68EEA - Description: CAF slot 8
* Address: 20F68EEC - Description: CAF slot 9
[/quote]
2. The Code
Front Grapple
Create a Finisher 1 Part 1 // not recommend
D0F68EEC 00004D47
10F68EDC 0000????
Create a Finisher 1 Part 2
D0F68EEC 00004D47
10F68EDE 0000????
Create a Finisher 1 Part 3
D0F68EEC 00004D47
10F68EE0 0000????
Create a Finisher 1 part 4
D0F68EEC 00004D47
10F68EE2 0000????
Create a Finisher 1 part 5
D0F68EEC 00004D47
10F68EE4 0000????
Create a Finisher 1 part 6
D0F68EEC 00004D47
10F68EE6 0000????
Create a Finisher 1 part 7
D0F68EEC 00004D47
10F68EE8 0000????
Create a Finisher 1 part 8
D0F68EEC 00004D47
10F68EEA 0000????
Create a Finisher 1 part 9
D0F68EEC 00004D47
10F68EEC 0000????
--) where ???? is the move id
For editing others position,read part "4. Technical Information" below
Create a Finisher 1 Part 1 // not recommend
D0F68EEC 00004D47
10F68EDC 0000????
Create a Finisher 1 Part 2
D0F68EEC 00004D47
10F68EDE 0000????
Create a Finisher 1 Part 3
D0F68EEC 00004D47
10F68EE0 0000????
Create a Finisher 1 part 4
D0F68EEC 00004D47
10F68EE2 0000????
Create a Finisher 1 part 5
D0F68EEC 00004D47
10F68EE4 0000????
Create a Finisher 1 part 6
D0F68EEC 00004D47
10F68EE6 0000????
Create a Finisher 1 part 7
D0F68EEC 00004D47
10F68EE8 0000????
Create a Finisher 1 part 8
D0F68EEC 00004D47
10F68EEA 0000????
Create a Finisher 1 part 9
D0F68EEC 00004D47
10F68EEC 0000????
--) where ???? is the move id
For editing others position,read part "4. Technical Information" below
3. In-game
For best Result,go STRAIGHT to "Create A Wrestler/New Finisher/Position" (BTW,did you remember to get rid of slot 1 ? )
Choose the Move as follow (it is almost always the first choice)
<blockquote class='quote\\_blockquote'><dl><dt>Quote:</dt><dd> </dd></dl><div>
1st Argentine Clutch 01
2nd 360 Argentine Backbreaker Spin
3rd 360 Argentine Backbreaker Spin
4th 360 Argentine Backbreaker Spin
5th 360 Argentine Backbreaker Spin
6th 360 Argentine Backbreaker Spin
7th 360 Argentine Backbreaker Spin
8th 360 Argentine Backbreaker Spin
AHEM !!!
9th Sitdown Shock Impact
[/quote]
If you do it right the code will active (patches the move) then deactive ITSELF and you're done
Move slot 1 to another slot ,delete it(for next hack) and move on.
Have fun creating good CAF
? )Choose the Move as follow (it is almost always the first choice)
<blockquote class='quote\\_blockquote'><dl><dt>Quote:</dt><dd> </dd></dl><div>
1st Argentine Clutch 01
2nd 360 Argentine Backbreaker Spin
3rd 360 Argentine Backbreaker Spin
4th 360 Argentine Backbreaker Spin
5th 360 Argentine Backbreaker Spin
6th 360 Argentine Backbreaker Spin
7th 360 Argentine Backbreaker Spin
8th 360 Argentine Backbreaker Spin
AHEM !!!
9th Sitdown Shock Impact
[/quote]
If you do it right the code will active (patches the move) then deactive ITSELF and you're done
Move slot 1 to another slot ,delete it(for next hack) and move on.
Have fun creating good CAF
4. Technical Information
Code's meaning
1st D0F68E?? 0000????
The code checks if your 9th (EC) parts is "Sitdown Shock Impact" which is 4D47 as a safeguard(the game may reuse the address midway and if it contains CRITIAL information then ...BOOM!!!)
2nd 10F68E?? 0000????
The code patches the finisher
So to have the code working on other position,you have to know the id of those move,put the most comfortable "slot 9 finishing move" into the D-Code,then input the ID into the 1-Code
1st D0F68E?? 0000????
The code checks if your 9th (EC) parts is "Sitdown Shock Impact" which is 4D47 as a safeguard(the game may reuse the address midway and if it contains CRITIAL information then ...BOOM!!!)
2nd 10F68E?? 0000????
The code patches the finisher
So to have the code working on other position,you have to know the id of those move,put the most comfortable "slot 9 finishing move" into the D-Code,then input the ID into the 1-Code