D
Deleted User
Crowd Member
Trunks8427 FAQ on how to make moves
1. Get a piece of paper with a pencil and number 1-12
2. Turn gs on with No Mercy in and make sure code generator is on.
3. Go to the moves and find one you want to make.
4. Click the gs button right when you want to splice the move to a different one.
5. Go to Memory Editor and click go to address, then go to 8006B454 and record the value then go to 8006B456, 8006B514, 8006B516 and after you record these values mark them down on the sheet you marked 1-12, look below on how to fill out
It should look like this (fill in values where comment it)
1. value from 8006B454
2. value from 8006B456
3. (don't fill this in yet)
4. value from 8006B454
5. value from 8006B456
6. (don't fill in yet)
7. value from 8006B514
8. value from 8006B516
9. (don't fill in yet)
10. value from 8006B514
11. value from 8006B516
12. (don't fill in yet)
6. Now press start and find the move you want it to change in to, right where you want it to splice press the gs button again now get the values from 80006B460, 8006B462, 8006B520, 8006B522
7. Now fill 3 in with the value you got from 8006B460, 6 in with value from 8006B462, 9 with value from 8006B520, and 12 with the value from 8006B522.
8. now here is an exapmle of what your sheet will look like (but with different numbers)
1.389C
2.005C
3.00CB
4.389C
5.005C
6.8CFE
7.389D
8.005C
9.00CB
10.389D
11.005C
12.A6A8
8. Now go into your gs and make a new code like this and where it says what value it is put the value you recorded as the last 4 digits of that line.
D106B454 (1st value)
D106B456 (2nd value)
8106B460 (3rd value)
D106B454(4th value)
D106B456(5th value)
8106B462(6th value)
D106B514(7th value)
D106B516(8th value)
8106B520(9th value)
D106B514(10th value)
D106B516(11th value)
8106B522(12th value)
9. Now go preview the move you made, it will replace the first move you got the values from and if it freezes or glitches press the gs button right before it does it and get the values from 8006B454, 8006B456, 8006B514, and 8006B516 now get another sheet of paper and label 1-6 in number 3 and 6 on your paper just put 0000 but on number one put the 1st value you got and on number 2 put the second value on number 4 put the third value and on number 5 put the 4th value now add this to the end of your code
D106B454 (1st value)
D106B456 (2nd value)
8115AF52 0000
D106B514 (third value)
D106B516 (fourth value)
8115B2AA 0000
Note-Once you get the hang of this you should be able to figure things out on your own
1. Get a piece of paper with a pencil and number 1-12
2. Turn gs on with No Mercy in and make sure code generator is on.
3. Go to the moves and find one you want to make.
4. Click the gs button right when you want to splice the move to a different one.
5. Go to Memory Editor and click go to address, then go to 8006B454 and record the value then go to 8006B456, 8006B514, 8006B516 and after you record these values mark them down on the sheet you marked 1-12, look below on how to fill out
It should look like this (fill in values where comment it)
1. value from 8006B454
2. value from 8006B456
3. (don't fill this in yet)
4. value from 8006B454
5. value from 8006B456
6. (don't fill in yet)
7. value from 8006B514
8. value from 8006B516
9. (don't fill in yet)
10. value from 8006B514
11. value from 8006B516
12. (don't fill in yet)
6. Now press start and find the move you want it to change in to, right where you want it to splice press the gs button again now get the values from 80006B460, 8006B462, 8006B520, 8006B522
7. Now fill 3 in with the value you got from 8006B460, 6 in with value from 8006B462, 9 with value from 8006B520, and 12 with the value from 8006B522.
8. now here is an exapmle of what your sheet will look like (but with different numbers)
1.389C
2.005C
3.00CB
4.389C
5.005C
6.8CFE
7.389D
8.005C
9.00CB
10.389D
11.005C
12.A6A8
8. Now go into your gs and make a new code like this and where it says what value it is put the value you recorded as the last 4 digits of that line.
D106B454 (1st value)
D106B456 (2nd value)
8106B460 (3rd value)
D106B454(4th value)
D106B456(5th value)
8106B462(6th value)
D106B514(7th value)
D106B516(8th value)
8106B520(9th value)
D106B514(10th value)
D106B516(11th value)
8106B522(12th value)
9. Now go preview the move you made, it will replace the first move you got the values from and if it freezes or glitches press the gs button right before it does it and get the values from 8006B454, 8006B456, 8006B514, and 8006B516 now get another sheet of paper and label 1-6 in number 3 and 6 on your paper just put 0000 but on number one put the 1st value you got and on number 2 put the second value on number 4 put the third value and on number 5 put the 4th value now add this to the end of your code
D106B454 (1st value)
D106B456 (2nd value)
8115AF52 0000
D106B514 (third value)
D106B516 (fourth value)
8115B2AA 0000
Note-Once you get the hang of this you should be able to figure things out on your own